What is a mirror touch switch?

What is a mirror touch switch?

Mirror touch switch is an emerging product of the development of science and technology. It is specially designed for all kinds of intelligent bathroom light mirror, bathroom anti-fog light mirror, LED light mirror (mirror cabinet) and other products. This product has the characteristics of beautiful appearance, reliable performance, convenient installation, thin size, sensitive touch and so on. Suitable for all kinds of mirror lamp or other glass, plastic, ceramic or artificial stone surface touch sensing control.

The backlight (blue/white/red) is designed on the induction panel of the mirror touch switch. When the power supply and switch are connected and energized, the backlight on the induction panel will light up, and the output switch can be controlled by touching the induction point on the panel with your finger. The backlight is long bright (or color change) and the panel backlight and output can be closed by long pressing the induction point.
The size of the touch points on the mirror or glass should be round or square in diameter of 12-22mm and should be closed. First of all, the mercury around the lens touch point should be completely removed, and the width of the mercury line should be preferably 1-2mm. Use the U-shaped self-adhesive fixing bracket attached with the product and align the bracket with the center of the touch point according to the three cross positioning lines on the bracket (it is recommended to apply appropriate glass glue on the edge of the bracket to ensure that it will not fall off permanently). Insert the induction switch along the center of the bracket. The transparent part where the mercury is removed will be reflected by the backlight of the induction plate. It is beautiful and intuitive so that users can see the induction position of the touch switch at a glance.